Items 1-10 of 210

Universal Tab - 5/16 Hole

Universal Tab - 5/16 Hole.
  • $4.1200
  • Availability: 1

Motor Mount Tab - Bottom Rear F/C

Motor Mount Tab - Bottom Rear F/C.
  • $2.8000
  • Availability: 2

Lower Control Arm Tab - PM

Lower Control Arm Tab - PM. 2 required per application.
  • $14.7500
  • Availability: 4

Blow Back Strut - F/C

This is the standard blowback strut for a funny car. The strut has a clevis with a .219 slot and a 3/8" hole on each end. Hole centers are 2 13/16" reference. Made of 4130 steel.
  • $59.8500
  • Availability: 10

Blow Back Strut Pin F/C

This is a long shoulder 3/8" grade 8 bolt cut off and used to connect the blow back strut to the bellhousing on a funny car.
  • $24.6500
  • Availability: 46

Wt. Bar End Caps - 3" - Set

This weight bar end cap assy fits a 3" Weight Bar Tube. 1 cap has an 1 3/4" Hole and the other cap has no hole. The M-3301-A Cap & M-3301-B Bung are used in conjuction with M-102-A. Sold as a Pair, and made of 1/8" 4130 Material.
  • $10.3400 per Pair
  • Availability: 1

Wt. Bar End Caps - 2 1/2" - Set

This weight bar end cap assy fits a 2 1/2" Weight Bar Tube. 1 cap has an 1 3/4" Hole and the other cap has no hole. The M-3301-A Cap & M-3301-B Bung are used in conjuction with M-102-A. Sold as a Pair, and made of 1/8" 4130 Material.
  • $13.8000 per Pair
  • Availability: 7

Clevis - 3/8 Heim 7/8 Tube

U-bend for a 7/8" tube with a 3/8" hole. Fits a 3/8"heim end. Made with 4130 steel.
  • $8.4200
  • Availability: 52

Clevis - Pitman Arm F/C

This is a 7/8" u-bend that has been bent to fit around the pitman arm of a funny car. Made with 4130 steel.
  • $18.7500
  • Availability: 3

Clevis - Rear Tree/Draglink F/C

U-bend bent to fit 3/8" ID, steering bellcrank and rear end plate on f/f. Made with 4130 steel.
  • $16.5000
  • Availability: 28


Items 1-10 of 210