Narrow Your Results

  • Price Range

  • $     to    
Items 1-8 of 8

Motor Plate Stud 3/4" Steel - 1.65" Long

This is a steel 3/4"-16 motor plate stud, 1.65" overall, & .700" shoulder. The head is spot faced for screws to secure the stud to the motor plate. Use 2 -- 36FBH/stud to fasten M-1070 to motor plate.

Motor Plate Stud 3/4" Tia. - 1.65" Long

This is a titanium 3/4"-16 motor plate stud, 1.65" overall, & .700" shoulder. These can be pressed in a steel motor plate, 4 required per plate. See part numbers: M-211, M-212, M-212-T1,or M-213-T1 for the bottom bellhousing studs.

Motor Plate Stud 3/4" Tia. w/ Bolt Notch

This is a titanium 3/4"-16 motor plate stud, 1.65" overall, & .700" shoulder. These can be pressed in a steel or aluminum motor plate, 4 required per plate. The head is spot faced for screws to secure the stud to the motor plate. Use 2 -- 36FBH/stud to fasten M-1070-A2 to motor plate. See part numbers: M-211, M-212, M-212-T1,or M-213-T1 for the bottom bellhousing studs.

3/4-16 12Pt Nut

This steel nut is used in conjuction with the M-1070 motorplate stud. 3/4"-16 12pt Nut with 15/16" wrenching area nut.

3/4-16 12Pt Nut - Ti

This titanium nut is used in conjuction with the M-1070-A1 & M-1070- A2 motorplate stud. 3/4"-16 12pt Nut with 15/16" wrenching area nut.

3/4 Hard Flat Washer

This MS hardened washer is .062 thick with , 1.250 OD. This washer is used in conjuction with the M-1070 motorplate stud.

3/4" Flat Washer - Ti

This titanium washer is used in condjuction with the M-1070-A1 and M-1070-A2 motorplate stud.

Motorplate Stud-1/2" x 1.300-Steel

The M-214 is a Motorplate Stud-that measures 1/2" x 1.300-Steel. These studs are used for the bottom bellhousing.


Items 1-8 of 8