Narrow Your Results

  • Price Range

  • $     to    
Categories 1-1 of 1

Bushings - Wingstand

Categories 1-1 of 1
Items 21-30 of 59

Body Mount Pad Bushing - Steel

The M-29 Body Mount Pad bushing is typicaly used to mount the spaghetti/tubing to the body mount pads in a funny car body.The bushing is made from 7/16" X .083 DOM steel and measures 0.272" I.D., 7/16" O.D., and length is 1 3/8". There is a pdf chart that can be downloaded from our website, http://mckinneycorp.com/downloads/pdf/bushing.pdf, that will give you a list of some of the bushings that we carry. Should you not be able to find the bushing that you're looking for, call and we'll be happy to assist you in finding what you need.

Body Mount Pad Bushing - Ti

The M-29-TI Titanium Body Moun Pad bushing is used on the funny car body mount pad for the spaghetti to weld to. The bushing is made from 1/2 6-4 titanium RD bar and measures 0.272" I.D., 7/16" O.D., and length is 1 3/8". There is a pdf chart that can be downloaded from our website, http://mckinneycorp.com/downloads/pdf/bushing.pdf, that will give you a list of some of the bushings that we carry. Should you not be able to find the bushing that you're looking for, call and we'll be happy to assist you in finding what you need.bushing.

Steering Shaft Support Bushing

The M- 291-A Steering Shaft Support bushing is used in the steering shaft bearing assembly M-291 that welds to the footbox of a dragster. The bushing is made from 3/4" RD 4130 steel and measures 3/8" I.D., 3/4" O.D., and length is 0.925". There is a pdf chart that can be downloaded from our website, http://mckinneycorp.com/downloads/pdf/bushing.pdf, that will give you a list of some of the bushings that we carry. Should you not be able to find the bushing that you're looking for, call and we'll be happy to assist you in finding what you need.

Steering Shaft - Stop Bushing Alum

The M-293-A Steering Shaft Stop bushing goes on a dragster steering shaft to keep the shaft from pushing into the drivers chest in a front end impact. The bushing is made from 1" RD 6061 aluminuml and measures 0.630" I.D., 13/16" O.D., and length is 0.8". There is a pdf chart that can be downloaded from our website, http://mckinneycorp.com/downloads/pdf/bushing.pdf, that will give you a list of some of the bushings that we carry. Should you not be able to find the bushing that you're looking for, call and we'll be happy to assist you in finding what you need.

Fuel Tank Baffle Bushing - Long

The M-3210 Fuel Tank Baffle bushing welds to the hinged baffle door inside a fuel tank. Use along with three M-3211 short bushings to complete the fuel door. Requires 2 pieces per application. The bushing is made from 1" RD 6061 aluminum and measures 0.344" I.D., 0.550" O.D., and length is 2.563". There is a pdf chart that can be downloaded from our website, http://mckinneycorp.com/downloads/pdf/bushing.pdf, that will give you a list of some of the bushings that we carry. Should you not be able to find the bushing that you're looking for, call and we'll be happy to assist you in finding what you need.

Fuel Tank Baffle Bushing - Short

The M-3211 Fuel Tank Baffle bushing welds to the baffle inside a fuel tank for the hinged door. Use along with two M-3210 to complete fuel door. Requires 3 pcs per application. The bushing is made from 1" RD 6061 aluminum and measures 0.344" I.D., 0.600" O.D., and length is 1". There is a pdf chart that can be downloaded from our website, http://mckinneycorp.com/downloads/pdf/bushing.pdf, that will give you a list of some of the bushings that we carry. Should you not be able to find the bushing that you're looking for, call and we'll be happy to assist you in finding what you need.

Parachute Bushing - 1/2 Hole - Alum

The M-35 is the Parachute Shroud Line bushing that goes in the antirotation assembly. For all M-40 assemblies and M-4766. The bushing is made from 1" RD 6061 aluminuml and measures 1/2" I.D., 1" O.D., and length is 1.879". There is a pdf chart that can be downloaded from our website, http://mckinneycorp.com/downloads/pdf/bushing.pdf, that will give you a list of some of the bushings that we carry. Should you not be able to find the bushing that you're looking for, call and we'll be happy to assist you in finding what you need.

Parachute Bushing - 7/16 Hole - Alum

The M-35-A Parachute bushing is for the anti-rotation M-4765 only. The bushing is made from 1" RD 6061aluminum and measures 7/16" I.D., 1" O.D., and length is 2". There is a pdf chart that can be downloaded from our website, http://mckinneycorp.com/downloads/pdf/bushing.pdf, that will give you a list of some of the bushings that we carry. Should you not be able to find the bushing that you're looking for, call and we'll be happy to assist you in finding what you need.

Rear End Mount Bushing

The M-36 Rear End Mount bushing welds to the rear end mounting bracket. It takes 16 per car. The bushing is made from 3/4" RD 4130 steel and measures 7/16" I.D., 3/4" O.D., and length is 5/16". There is a pdf chart that can be downloaded from our website, http://mckinneycorp.com/downloads/pdf/bushing.pdf, that will give you a list of some of the bushings that we carry. Should you not be able to find the bushing that you're looking for, call and we'll be happy to assist you in finding what you need.

M-3723 G. D. Adj Bushing

The M-3723-B Threaded bushing is (3/8"-24) for a comp dragster front motor plate bushing assembly. The tapped 3/8" - 24 threaded bushing is made from 3/4" RD 4130 steel and measures 7/16" I.D., 0.65" O.D., and length is 3/4". There is a pdf chart that can be downloaded from our website, http://mckinneycorp.com/downloads/pdf/bushing.pdf, that will give you a list of some of the bushings that we carry. Should you not be able to find the bushing that you're looking for, call and we'll be happy to assist you in finding what you need.


Items 21-30 of 59